ANM Cutting Nozzles
ANM are a range of nozzles used in the cutting of mild steel using the oxy/acetylene process. For use with NM cutters or HD cutting attachments.
- Description
- Have a Question?
ANM Cutting Nozzles
Cutting nozzles are precision-machined and hand-finished to give a positive seat. The orifices are swaged to minimise gas turbulence and slag accumulation, whilst the nozzle design provides excellent gas-mixing for fast pre-heating. The smoother nozzle surface reflects heat and reduces splatter accumulation. Every nozzle is inspected and flame-tested at the point of manufacture. Nozzle faces can be dressed using a fine file and the orifices cleaned using the appropriate nozzle cleaner. The flame shape and nozzle performance depend heavily on orifices having sharp, square edges. They should never be bell-mouthed by using pieces of wire to clean them.
ANM Cutting Nozzles are a range of nozzles used in the cutting of mild steel using the oxy/acetylene process. For use with NM cutters or HD cutting attachments.
The ANM range of gas cutting nozzles are available in various sizes depending on the thickness of steel you are cutting, These ANM nozzles are a solid 1 piece nozzle which are used with oxygen and acetylene gases. Also known as Acetylene Nozzle Mix they have 3 machined seating faces and will fit most cutting torches on the market.
Common torches that use this nozzle are the Esab or Murex type 3, 4, 5, or 6 shanks with a cutting attachment, or the NM range of cutters such as Murex NM 250 or 400.
Sizes
1/8" 190mm to 300mm
1/16" 10mm to 75mm
1/32" 3mm to 6mm
3/32" 90mm to 150mm
3/64" 5mm to 12mm
Check out more gas cutting and consumables
PRECAUTIONARY MEASURES IN GAS CUTTING, WELDING, AND SIMILAR PROCESSES
